Dynomax 41432 Aluminized Elbow

Dynomax 41432 Aluminized Elbow Reviews

Other Picture

Dynomax 41432 Aluminized Elbow Feature

• Heavy gauge aluminized material for long service life
• 90 degree
• 5" radius
• Made from 18 gauge steel
• Highest quality

Walker has everything from brackets and clamps to connectors and specialty pipes - all the accessories you need to do the complete exhaust job. Walker is your one-stop exhaust shop offering a full line of pipes and accessories.

Visit Store Now !!

Detail Products

Detail Reviews

Jul 01, 2011 06:17:04

Borla 40943 XR-1 Sportsman Racing Muffler

Borla 40943 XR-1 Sportsman Racing Muffler Reviews

Other Picture

Borla 40943 XR-1 Sportsman Racing Muffler Feature

• Engineered to provide excellent exhaust emission and internal power generation
• Features XR-1 Raceline Technology
• Manufactured from T-304 stainless steel
• Provides brilliant fuel economy and increase horsepower efficiently
• Easy installation

Borla XR-1 Sportsman Racing Mufflers are engineered to provide excellent exhaust emission and internal power generation. These mufflers feature XR-1 Raceline Technology and are manufactured from T-304 stainless steel which offers long lasting durability. They are equipped with longer spikes ensuring maximum flow and power. These mufflers provide brilliant fuel economy and increase horsepower efficiently. They are corrosion resistant and ensure easy installation.

Visit Store Now !!

Detail Products

Detail Reviews

Jun 30, 2011 09:38:06

Flowmaster 15801 2.50" Rear Exit Prebend Tailpipe - 2 Piece

Flowmaster 15801 2.50" Rear Exit Prebend Tailpipe - 2 Piece Reviews

Other Picture

Flowmaster 15801 2.50" Rear Exit Prebend Tailpipe - 2 Piece Feature

• Mandrel bent 16ga aluminized tubing
• 2.50 inch prebent tailpipes
• Exits at rear of vehicle
• Keeps the exhaust system cleaner
• Use Offset Inlet / Offset Outlet Mufflers Only

Pre bent Pipe Kits. Flowmaster's 16 gauge mandrel bent pipe kits are designed to fit perfectly onto your vehicle with all the quality and performance that you would expect from Flowmaster.

Visit Store Now !!

Detail Products

Detail Reviews

Jun 29, 2011 07:38:04

HeatShield 315028 HP Color Exhaust Wrap Green 1" Wide x 50' Exhaust Wrap

HeatShield 315028 HP Color Exhaust Wrap Green 1" Wide x 50' Exhaust Wrap Reviews

Other Picture

HeatShield 315028 HP Color Exhaust Wrap Green 1" Wide x 50' Exhaust Wrap Feature

• Rated for 1200 degree Fahrenheit continuous use, 2000 degree Fahrenheit intermittent
• Reduces under hood temperatures up to 50 percentage
• Increases horsepower
• All rolls of exhaust wrap are 1/16 inches thick

Heatshield Exhaust Wrap - Colored, 1" x 50', Green

Visit Store Now !!

Detail Products

Detail Reviews

Jun 27, 2011 21:10:03

Holley 26-68 Replacement Jet Removal Tool

Holley 26-68 Replacement Jet Removal Tool Reviews

Other Picture

Holley 26-68 Replacement Jet Removal Tool Feature

• Great for quick change jet fuel bowls
• Works with round-style jet applications
• Red and black plastic handle
• Made of steel

This replacement jet removal tool is tapered to fit the end of the jet and is used to eliminate damage during removal. It is great for quick changes of jet fuel bowls and is designed to fit all round-style jet applications. It is made of steel and features a red and black plastic handle.

Visit Store Now !!

Detail Products

• Holley 36-181 Jet Assortment Kit
• Holly Carburetor Handbook 4150 & 4160 Hp473

Detail Reviews

Jun 26, 2011 13:11:08

Magnaflow 15641 Stainless Steel 2.25" Single Cat-Back Exhaust System

Magnaflow 15641 Stainless Steel 2.25" Single Cat-Back Exhaust System Reviews

Other Picture

Magnaflow 15641 Stainless Steel 2.25" Single Cat-Back Exhaust System Feature

• Reduces engine heat, back pressure and improves exhaust scavenging for high performance
• Manufactured from heavy-duty stainless steel
• Features a 2.25 inch tube
• Backed by lifetime warranty
• Uses mandrel bent piping for optimal flow

Magnaflow Stainless Steel 2.25 inch Single Cat-Back Exhaust System reduces engine heat, back pressure as well as improve exhaust scavenging for high power and performance of the engine. It is manufactured from heavy-duty stainless steel and feature a 2.25 inch tube. This exhaust system is backed by a lifetime warranty.

Visit Store Now !!

Detail Products

Detail Reviews

Jun 25, 2011 16:10:05

Holley 37-934 Carburetor Renew Kit

Holley 37-934 Carburetor Renew Kit Reviews

Other Picture

Holley 37-934 Carburetor Renew Kit Feature

• Brings carburetors back to original specifications
• Comes with gaskets, O-rings, pump diaphragms, needles and seats, and power valves
• Includes detailed instructions for a complete rebuild

This renew kit brings carburetors back to a like-new condition. It includes all the necessary gaskets, O-rings, pump diaphragms, needles and seats, and power valves. Detailed instructions are also included to aid in a complete rebuild.

Visit Store Now !!

Detail Products

Detail Reviews

Jun 24, 2011 16:33:06

BOSAL EXHAUST Catalytic Converter 079-3019 New

BOSAL EXHAUST Catalytic Converter 079-3019 New Reviews

Other Picture

Bosal Exhaust 079-3019 Catalytic Converter

Visit Store Now !!

Detail Products

Detail Reviews

Jun 23, 2011 16:46:29

BOSAL EXHAUST Catalytic Converter 079-4101 New

BOSAL EXHAUST Catalytic Converter 079-4101 New Reviews

Other Picture

Bosal Exhaust 079-4101 Catalytic Converter

Visit Store Now !!

Detail Products

Detail Reviews

Jun 22, 2011 13:03:06

Magnaflow 23433 Direct Fit Catalytic Converter (Non CARB compliant)

Magnaflow 23433 Direct Fit Catalytic Converter (Non CARB compliant) Reviews

Other Picture

Magnaflow 23433 Direct Fit Catalytic Converter (Non CARB compliant) Feature

• Designed for easy bolt-on installation
• Features a ribbed design, a funneled inlet and outlet
• Consists of stainless steel body and heat shield
• Requires no cutting or bending
• This item is not for sale in California/Non CARB compliant

Magnaflow Direct Fit Catalytic Converter is designed for easy bolt-on installation. It features a ribbed design, a funneled inlet and outlet which renders a customized fit. This converter consists of stainless steel body and heat shield. It requires no cutting or bending and is backed by 25000 miles or 5 year limited warranty whichever comes first.

Visit Store Now !!

Detail Products

Detail Reviews

Jun 21, 2011 07:56:04

Flowmaster 9430109 10 Series Race Muffler - 3.00" Center In / 3.00" Center Out - Aggressive Sound

Flowmaster 9430109 10 Series Race Muffler - 3.00" Center In / 3.00" Center Out - Aggressive Sound Reviews

Other Picture

Flowmaster 9430109 10 Series Race Muffler - 3.00" Center In / 3.00" Center Out - Aggressive Sound Feature

• Durable fully welded 16 gauge aluminized steel - single chamber race muffler
• Minimal decibel reduction over open headers
• No internal packing to blow-out
• Race proven patented delta flow technology - designed for maximum horsepower and torque

The single chamber 10 Series race mufflers are intended for racing applications and utilize Flowmaster's patented Delta Flow technology for maximum performance. Recommended for racing applications where a muffler is required without a set decibel limit to be met. It will provide a noticeable dB reduction over open headers.

Visit Store Now !!

Detail Products

Detail Reviews

Jun 19, 2011 05:38:07

Buddy Club BC03-SP2EXAE86 Spec II Cat-Back Exhaust Muffler System for Toyota Corolla 1983-1987

Buddy Club BC03-SP2EXAE86 Spec II Cat-Back Exhaust Muffler System for Toyota Corolla 1983-1987 Reviews

Other Picture

Buddy Club BC03-SP2EXAE86 Spec II Cat-Back Exhaust Muffler System for Toyota Corolla 1983-1987 Feature

• Complete circuit spec cat-back exhaust system
• SUS304 stainless steel muffler(s)
• Durability can be seen throughout the construction of the system
• Inner silencer(s) included with all systems

A racing spec muffler is a light weight and highly efficient muffler that is made to perform for circuit run. In its street version, to optimize torque in the low to mid speed range, it is equipped with an efficient middle silencer (resonator). Racing Spec Mufflers were designed for high performance as well as meeting sound level standards. With its deep throaty tone, it echo's it racing linage. Spec II is a specially designed system for competition use only. Its simple straight through design creates an increase of exhaust gas velocity in order to improve efficiency. The middle silencer (resonator) on the main pipe is designed to maintain torque in the low to mid speed range. All mufflers are made with SUS304 stainless steel, 1mm is used for main pipe and the ultra 0.8mm is used for main silencer. This combination creates a super light weight muffler.

Visit Store Now !!

Detail Products

Detail Reviews

Jun 18, 2011 07:19:07

Magnaflow 35167 Stainless Steel 2.25" Exhaust Tip

Magnaflow 35167 Stainless Steel 2.25" Exhaust Tip Reviews

Other Picture

Magnaflow 35167 Stainless Steel 2.25" Exhaust Tip Feature

• Reduces exhaust gas pressure and enhances the performance of the exhaust system
• Manufactured from high strength stainless steel
• Easy to install
• Corrosion resistant
• Backed by lifetime warranty

Magnaflow Stainless Steel 2.25 inch Exhaust Tip is designed to reduce exhaust gas pressure and enhances the performance of the exhaust system. It is manufactured from high strength stainless steel and come in mirror-like finish. This exhaust tip feature a inch tip. It is corrosion resistant and is backed by lifetime warranty.

Visit Store Now !!

Detail Products

Detail Reviews

Jun 17, 2011 03:21:12

Magnaflow 23892 Direct Fit Catalytic Converter (Non CARB compliant)

Magnaflow 23892 Direct Fit Catalytic Converter (Non CARB compliant) Reviews

Other Picture

Magnaflow 23892 Direct Fit Catalytic Converter (Non CARB compliant) Feature

• Designed for easy bolt-on installation
• Features a ribbed design, a funneled inlet and outlet
• Consists of stainless steel body and heat shield
• Requires no cutting or bending
• This item is not for sale in California/Non CARB compliant

Magnaflow Direct Fit Catalytic Converter is designed for easy bolt-on installation. It features a ribbed design, a funneled inlet and outlet which renders a customized fit. This converter consists of stainless steel body and heat shield. It requires no cutting or bending and is backed by 25000 miles or 5 year limited warranty whichever comes first.

Visit Store Now !!

Detail Products

Detail Reviews

Jun 16, 2011 02:15:04

Borla 17236 Stainless Steel Cat-Back Exhaust System

Borla 17236 Stainless Steel Cat-Back Exhaust System Reviews

Other Picture

Borla 17236 Stainless Steel Cat-Back Exhaust System Feature

• Engineered to provide excellent exhaust emission and internal power generation
• Features a multi-core technology
• Manufactured from austenitic stainless steel
• Provides brilliant fuel economy and increase horsepower efficiently
• Easy installation

Borla Stainless Steel Cat-Back Exhaust Systems are engineered to provide excellent exhaust emission and internal power generation. These exhausts feature a multi-core technology and are manufactured from austenitic stainless steel which offers long lasting durability. They are equipped with ultra-smooth mandrel bends ensuring maximum flow and power. These exhausts provide brilliant fuel economy and increase horsepower efficiently. They are corrosion resistant and ensure easy installation.

Visit Store Now !!

Detail Products

Detail Reviews

Jun 14, 2011 11:53:03

Edelbrock 8101 Braided Stainless Steel Adjustable Dual Feed Fuel Line Kit

Edelbrock 8101 Braided Stainless Steel Adjustable Dual Feed Fuel Line Kit Reviews

Other Picture

Edelbrock 8101 Braided Stainless Steel Adjustable Dual Feed Fuel Line Kit Feature

• Made from aircraft quality buna-N neoprene hose encased in braided stainless steel
• Comes with a natural finish
• Includes a single 3/8 NPT inlet
• Resistant to temperature, gas and oil
• Fuel line is adjustable between the carburetor bowls from 7-1/2 to 11-1/2

The Edelbrock Adjustable Dual Feed Fuel Line Kit is made from aircraft quality buna-N neoprene hose encased in braided stainless steel. They are temperature, gas and oil resistant. They offer more volume with a single 3/8 NPT inlet with female threads and dual 7/8-20 outlet with male threads. The fuel line is adjustable between the carburetor bowls from 7-1/2 to 11-1/2. It also includes a 1/8 pipe fitting, plug for fuel pressure gauge, etc. The hose nipple is not included.

Visit Store Now !!

Detail Products

Detail Reviews

Jun 13, 2011 11:22:04

Borla 140010 Cat-Back Exhaust System

Borla 140010 Cat-Back Exhaust System Reviews

Other Picture

Borla 140010 Cat-Back Exhaust System Feature

• Made of corrosion resistant aircraft quality stainless steel which decreases the fatigue incurred on these parts during high performance uses
• BORLA uses patented straight-through and multi-core technology to help increase horsepower and torque.
• Precision manufactured using aircraft-quality stainless steel, guaranteed to look like new for one million miles.
• Includes a side exit single round rolled angle-cut tip

Borla's T-304 stainless steel high performance exhaust system is built to last under extreme conditions. Borla exhaust systems give you more power and torque, longer engine life, precision fit, and the distinctive "BORLA Sound of Power" recognized by automotive enthusiasts around the world.

Visit Store Now !!

Detail Products

Detail Reviews

Jun 12, 2011 10:23:05